Current product：Speed Monitoring
>> Electronic Speed Monitor
Name: Electronic Speed Monitor
Model:
EDO/JMNC
Detail
The Electronic Speed Monitor Relays EDO/JMNC are used in connection with a pulse sensor to monitor the rotational speed and standstill of drives. Pulse sensors according to NAMUR EN 50227 as well as opto-electronic pulse transducers can be connected to the speed monitor relay.The pulse output is fed to the speed monitor relay where the pulse frequency is compared with the frequency set by the control of the relay. When the input frequency passes the set frequency the internal output relay is switched.
Warning or control equipment can be connected to this output relay and operate when the speed either increases or decreases from the setpoint. The output relay contacts of JMNC are goldplated to improve true contact even in case of low voltage circuit operations. The operation of the relay can be inhibited during start-up of the monitored drive by adjusting the start-up potentiometer to the time taken for the drive to reach operating speed.
| 
